Details
Description
The Furl Circle Wall Light is part of the Furl range, which is made up of a unified feature lighting collection of three origami-inspired wall lights, each made from folded sheets of metal rolled over to imitate the softness of paper. Each of the lights in the Furl range is suitable for both interior and exterior applications. The Furl Circle Wall Light emits diffused light from the open edges as well as through a laser-cut incision that references the original shape of the metal sheet. The result is a fixture that not only creates an ambient light but is also an eye-catching wall feature that becomes a considered element in any interior or exterior scheme. Learn more about the design process on the Furl range here. The Furl Circle Wall light is available in three finishes; White Powder coat, Brass with a Clear Powder coat and Raw brass which will naturally patina. These feature lights can be mounted in four orientations; up, down, left & right.
Size (mm): 380h x 190w x 70-80d
*Lights are rolled by hand, so dimensions may vary slightly
Lamp base: LED Tube Strip with heat sink & PVC diffuser
7W 3000K 450lm LED | Lamp included
Voltage: DC12V
RCM & ETL Certification
Driver (AU, NZ, UK, EU)
- Suitable for use in Australia, New Zealand, United Kingdom, Europe
- IP67 rated - Waterproof
- Dimmable: No
- RCM Certified
-10W
- Product Dimensions: 120 x 29 x 21 mm
- Input voltage: 12V DC constant voltage
- Short circuit, overload, over temperature protection
- Flex & plug included
- These drivers are manufactured with a split cable format for carrying increased current for easier connection of multiple loads
- Minimum load is 10% of rated power
- Maximum load is 80% of rated power
- Driver can be used at full load capacity by connecting all cables to one terminal block
- Driver can be used with any combination of split cables (as long as the minimum and maximum loads below are adhered to)
- To minimise the occurrence of voltage drops, the recommended maximum distance from the light source is 10m
- Download Spec Sheet (product code: CLA111011)
Driver (North America)
- Suitable for use in North America
- IP20 rated - Indoor use only
- Dimmable: Yes
- ETL Certified
- 25W
- Product Dimensions: 6.1 x 2.1 x 0.79inches
- Compatible with Lutron, Leviton systems
- Input voltage: 100-130V AC 50/60Hz
- Output voltage: 12V DC constant voltage
- Short circuit, overload, over temperature protection
- Product code: EZ1401
Designed & hand assembled in Byron Bay
Details
Description
The Furl Circle Wall Light is part of the Furl range, which is made up of a unified feature lighting collection of three origami-inspired wall lights, each made from folded sheets of metal rolled over to imitate the softness of paper. Each of the lights in the Furl range is suitable for both interior and exterior applications. The Furl Circle Wall Light emits diffused light from the open edges as well as through a laser-cut incision that references the original shape of the metal sheet. The result is a fixture that not only creates an ambient light but is also an eye-catching wall feature that becomes a considered element in any interior or exterior scheme. Learn more about the design process on the Furl range here. The Furl Circle Wall light is available in three finishes; White Powder coat, Brass with a Clear Powder coat and Raw brass which will naturally patina. These feature lights can be mounted in four orientations; up, down, left & right.
Size (mm): 380h x 190w x 70-80d
*Lights are rolled by hand, so dimensions may vary slightly
Lamp base: LED Tube Strip with heat sink & PVC diffuser
7W 3000K 450lm LED | Lamp included
Voltage: DC12V
RCM & ETL Certification
Driver (AU, NZ, UK, EU)
- Suitable for use in Australia, New Zealand, United Kingdom, Europe
- IP67 rated - Waterproof
- Dimmable: No
- RCM Certified
-10W
- Product Dimensions: 120 x 29 x 21 mm
- Input voltage: 12V DC constant voltage
- Short circuit, overload, over temperature protection
- Flex & plug included
- These drivers are manufactured with a split cable format for carrying increased current for easier connection of multiple loads
- Minimum load is 10% of rated power
- Maximum load is 80% of rated power
- Driver can be used at full load capacity by connecting all cables to one terminal block
- Driver can be used with any combination of split cables (as long as the minimum and maximum loads below are adhered to)
- To minimise the occurrence of voltage drops, the recommended maximum distance from the light source is 10m
- Download Spec Sheet (product code: CLA111011)
Driver (North America)
- Suitable for use in North America
- IP20 rated - Indoor use only
- Dimmable: Yes
- ETL Certified
- 25W
- Product Dimensions: 6.1 x 2.1 x 0.79inches
- Compatible with Lutron, Leviton systems
- Input voltage: 100-130V AC 50/60Hz
- Output voltage: 12V DC constant voltage
- Short circuit, overload, over temperature protection
- Product code: EZ1401
Designed & hand assembled in Byron Bay
Raw Brushed Brass
White Powder Coat
Brass with Clear Powder Coat
Raw Brushed Brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments.
Frequently asked questions
Lights are rolled by hand so dimensions may vary slightly
Raw brushed brass will naturally patina over time.
Please wear gloves during installation. Learn more about how to care for brass here.
Lights can be installed in any orientation
When an item is labelled as "Pre-Order" it means that this item is not made yet and the production time depends on the complexity of the design and quantity ordered. In other words, the item is put into production when you pre-order an item.
When you purchase both items, you will have to wait until the production of the Pre-Order item is fully finished. If you would like to receive your In-Stock items in advance of the Pre-Order items we recommend purchasing Pre-Orders and In-Stock items separately.
These lights are hand made to order in our Byron Bay studio so please choose carefully. Unfortunately for this reason we do not provide refunds if you change your mind or make a wrong decision. Production commences as soon as the order is confirmed. This allows us to take a more ethical and sustainable approach reducing the risk of excess unwanted stock and overproduction.
You will receive an email with your tracking information as soon as your order has been collected by one of our Shipping partners to notify you that it's on its way. You can track the progress of shipment by clicking the link in the Tracking email or by entering your order or tracking number directly on the Shipping Carriers tracking page. For more information please visit our Shipping page.
