Details
Description
The Lune Pendant Light can be installed in multiple configurations, creating a classic feature lighting piece for a larger space and is part of the Marz Designs Lune range. Handmade slip-cast ceramic lamp holders offset the slim profile of the metal bracket of the Lune Pendant Light. The Lune feature lighting range draws inspiration from the geometries, forms and cycles of the moon with the frosted globes being the centrepiece, while the metal bracket holds the striking form of the light.
Size (mm): 195h x 240w x 960d
(Custom metal lengths available - contact us for more information)
Cord length - 3m
Lamp base: G9 push fit
Lamp
220-280V: 4W 3000K 410lm LED | Lamp included
100-130V: 4.5W 3000K 450lm LED | Lamp included
Voltage: 220-240V or 100-130V
Dimmable
Lamp included is compatible with most brand name dimmers
CE, SAA and UKCA Certification
Designed & hand assembled in Byron Bay
Details
Description
The Lune Pendant Light can be installed in multiple configurations, creating a classic feature lighting piece for a larger space and is part of the Marz Designs Lune range. Handmade slip-cast ceramic lamp holders offset the slim profile of the metal bracket of the Lune Pendant Light. The Lune feature lighting range draws inspiration from the geometries, forms and cycles of the moon with the frosted globes being the centrepiece, while the metal bracket holds the striking form of the light.
Size (mm): 195h x 240w x 960d
(Custom metal lengths available - contact us for more information)
Cord length - 3m
Lamp base: G9 push fit
Lamp
220-280V: 4W 3000K 410lm LED | Lamp included
100-130V: 4.5W 3000K 450lm LED | Lamp included
Voltage: 220-240V or 100-130V
Dimmable
Lamp included is compatible with most brand name dimmers
CE, SAA and UKCA Certification
Designed & hand assembled in Byron Bay
Brass
White Powder Coat
Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.
Vanilla Bean
Slate
Sage
This material is poured & mixed by hand and some pieces will have veining or visible swirls in the pigment. These are considered natural characteristics and a hallmark of the handmade.
Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.
The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.
Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.
Ceramic production process.
Frequently asked questions
Straw fabric flex with inline switch and plug
Please Note: Due to the nature of clay and the manufacturing process, variations in shade, colour, and size of up to 5% are considered a natural characteristic. The ceramic slip is mixed by hand and swirls in the ceramics are considered a hallmark of the handmade.
Raw brushed brass will naturally patina over time.
Please wear gloves during installation.
When an item is labelled as "Pre-Order" it means that this item is not made yet and the production time depends on the complexity of the design and quantity ordered. In other words, the item is put into production when you pre-order an item.
When you purchase both items, you will have to wait until the production of the Pre-Order item is fully finished. If you would like to receive your In-Stock items in advance of the Pre-Order items we recommend purchasing Pre-Orders and In-Stock items separately.
These lights are hand made to order in our Byron Bay studio so please choose carefully. Unfortunately for this reason we do not provide refunds if you change your mind or make a wrong decision. Production commences as soon as the order is confirmed. This allows us to take a more ethical and sustainable approach reducing the risk of excess unwanted stock and overproduction.
You will receive an email with your tracking information as soon as your order has been collected by one of our Shipping partners to notify you that it's on its way. You can track the progress of shipment by clicking the link in the Tracking email or by entering your order or tracking number directly on the Shipping Carriers tracking page. For more information please visit our Shipping page.
