Terra 1 Long Wall Light

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Lights with an IP rating of 20 can be installed in bedrooms, living rooms, dining rooms or kitchens (as long as they are located away from wet areas).

Lights with an IP rating of 44 can be used in an indoor damp location and can stand up to water splashing from all directions for up to 5 minutes such as kitchens and bathrooms (refer to the Australian Standard placement guide).