FREE DOMESTIC SHIPPING ON ORDERS OVER $150 (excludes Bulky goods)
0 products in your cart Continue Shopping

Total: $0.00

Shipping calculated at checkout
View Cart Continue Shopping
Continue browsing

OBTAIN A TRADE QUOTE

If you're an interior designer, architect or builder, you can open a trade account to access quote requests and trade pricing.

To apply, fill out the form below with a few details about your project. A member of our team will be in touch shortly.

Prefer to reach out directly? Email us at info@marzdesigns.com, or calling +61 (02) 6680 4971.

OBTAIN A TRADE QUOTE

CONTACT INFOMATION

TELL US ABOUT YOUR PROJECT
WHICH PRODUCTS ARE YOU INTERESTED IN?

Orb Pendant

Orb Surface Sconce

Wall Light

Selene Uplight

Surface Sconce

Selene Surface Sconce

Wall Light

Bermuda

Pendant Light

Terra 1.5 Pendant

Wall Light

Terra 0.5 Wall Light

Wall Light

Terra 2

Ceiling Light

Terra 1.5 Ceiling

Surface Sconce

Terra 1 Surface Sconce

Pendant Light

Terra 1 Pendant

Wall Light

Terra 1 Long Articulating

Spot Light

Terra 1 Articulating

Surface Sconce

Terra 1 Short Articulating

Wall Light

Terra 0 Long Articulating

Surface Sconce

Terra 0 Short Articulating

Pendant Light

Terra 0 Pendant

Pendant Light

Terra 00 Pendant

Surface Sconce

Terra 00 Surface Sconce

Pendant Light

Bright Beads Art

Pendant Light

Bright Beads Africa

Pendant Light

Bright Beads Alice

Wall Light

Bright Beads Wall Disc

Table Light

Bright Beads Sphere

Pendant Light

Bright Beads Sphere Pendant

Wall Light

Furl Circle

Wall Light

Lune Bedside Wall Shelf

Wall Light

Lune Wall Light

Ceiling Light

Attalos Ceiling Light

Table Lamp

Attalos Table Lamp

Wall Light

Attalos Wall Light

Pendant Light

Attalos Pendant Light

Surface Sconce

Aurelia Surface Sconce

Pendant Light

Aurelia Pendant

Wall Light

Aurelia Wall Light

Pendant Light

Aurelia Double Offset Pendant

Pendant Light

Aurelia Double Pendant

Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. As timber is a natural material the shade and tone can vary from piece to piece, this includes both Bleached and Blackened Ash as the stains applied are transparent and variation does occur. We offer this range in four timber varieties as shown below.

Walnut

Ash

Bleached Ash

Blackened Ash

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Timber
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. As timber is a natural material the shade and tone can vary from piece to piece, this includes both Bleached and Blackened Ash as the stains applied are transparent and variation does occur. We offer this range in four timber varieties as shown below.

Walnut

Ash

Bleached Ash

Blackened Ash

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Marble Varieties
The fitting is available in three marble varieties

Moss

Plum

White Carrara

Order samples
What to expect

Moss is a Dark Green Marble from Rajasthan in India, the serpentine-coloured marble’s distinct veins can vary from highly contrasting to a more subtle and dispersed texture

Plum is a Rosso Lepanto Marble from Turkey; the deep red colour and distinct veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique.

Bianco Carrara Marble from Northern Italy is one of the more consistent marbles. The white stone and soft grey marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary.
Metal finish
The fitting is available in two metal finishes

Brass

Brushed Black

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

This material is poured & mixed by hand and some pieces will have veining or visible swirls in the pigment. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order Samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Which IP do I choose?

Lights with an IP rating of 20 can be installed in bedrooms, living rooms, dining rooms or kitchens (as long as they are located away from wet areas).

Lights with an IP rating of 44 can be used in an indoor damp location and can stand up to water splashing from all directions for up to 5 minutes such as kitchens and bathrooms (refer to the Australian Standard placement guide).

Learn more about Ip ratings
Ceramic colours
The fitting is available in six ceramic colours

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Which IP do I choose?

Lights with an IP rating of 20 can be installed in bedrooms, living rooms, dining rooms or kitchens (as long as they are located away from wet areas).

Lights with an IP rating of 44 can be used in an indoor damp location and can stand up to water splashing from all directions for up to 5 minutes such as kitchens and bathrooms (refer to the Australian Standard placement guide).

Learn more about IP ratings
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Clay

Olive

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Which IP do I choose?

Lights with an IP rating of 20 can be installed in bedrooms, living rooms, dining rooms or kitchens (as long as they are located away from wet areas).

Lights with an IP rating of 44 can be used in an indoor damp location and can stand up to water splashing from all directions for up to 5 minutes such as kitchens and bathrooms (refer to the Australian Standard placement guide).

Learn more about IP ratings
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Which IP do I choose?

Lights with an IP rating of 20 can be installed in bedrooms, living rooms, dining rooms or kitchens (as long as they are located away from wet areas).

Lights with an IP rating of 44 can be used in an indoor damp location and can stand up to water splashing from all directions for up to 5 minutes such as kitchens and bathrooms (refer to the Australian Standard placement guide).

Learn more about IP ratings
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
This fitting is available in four metal finishes.

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

Order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. As timber is a natural material the shade and tone can vary from piece to piece, this includes both Bleached and Blackened Ash as the stains applied are transparent and variation does occur. We offer this range in four timber varieties as shown below.

Walnut

Ash

Bleached Ash

Blackened Ash

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Metal finish
The fitting is available in four metal finishes

Brass

Brushed Black

White Satin

Brushed Nickel

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in six ceramic colours.

Vanilla Bean

Lead

Olive

Clay

Fog

Chartreuse

order samples
What to expect

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. As timber is a natural material the shade and tone can vary from piece to piece, this includes both Bleached and Blackened Ash as the stains applied are transparent and variation does occur. We offer this range in four timber varieties as shown below.

Walnut

Ash

Bleached Ash

Blackened Ash

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.
Ceiling rose
This fitting is available in three metal finishes.

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceiling rose
This fitting is available in three metal finishes.

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceiling rose
This fitting is available in three metal finishes.

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. We offer this range in two timber varieties as shown below.

Oak

Walnut

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. We offer this range in two timber varieties as shown below.

Oak

Walnut

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Timber Varieties
Timber is an incredibly beautiful and resilient material and has a long life if maintained correctly. We offer this range in two timber varieties as shown below.

Oak

Walnut

Order samples
What to expect

Knots are a natural feature of timber and in many cases, enhance the appearance of the wood. These and other experiences contribute to the character of each piece of wood, and make each piece of timber unique. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Cracking and checking of timber is a very natural part of the life cycle of wood – even once it's been cut, shaped, and prepared. This individuality gives anything crafted from timber a character of its own and is not considered a defect.

Timber laminations which are layers of wood glued together with structural adhesives. This helps to create different sizes and shapes in timber that wouldn’t be easily sourced from natural wood and is superior to solid timber due to its high strength and dimensional stability

Wax is typically used as a sealant, which protects it from moisture and dirt and keeps the timber natural. It's non-toxic, environmentally friendly and can penetrate through layers of wood. Most of our timber items come pre-oiled; however, timber requires a regular maintenance program to maintain its natural shine and prevent it from drying, warping or splitting. We recommend polishing timber products every 3 to 6 months, using a natural beeswax polish to restore and maintain.

Learn more about the material
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Metal finish
The fitting is available in three metal finishes

Raw Brushed Brass

White Powder Coat

Brass with Clear Powder Coat

Order samples
What to expect

Raw Brushed Brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments.

Learn how to care for brass
Metal finish
The fitting is available in two metal finishes

Brass

White Powder Coat

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in three colours.

Vanilla Bean

Slate

Sage

Order samples
What to expect

This material is poured & mixed by hand and some pieces will have veining or visible swirls in the pigment. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Metal finish
The fitting is available in two metal finishes

Raw Brushed Brass

White Powder Coat

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Ceramic colours
This fitting is available in three colours

Vanilla Bean

Slate

Sage

Order samples
What to expect

This material is poured & mixed by hand and some pieces will have veining or visible swirls in the pigment. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay and the manufacturing process, variations in shade and colour do occur, and therefore ceramic colours can vary between batches of up to 5%. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can colour-match as closely as possible.

The Vanilla Bean glaze is mixed and applied by hand so the intensity of the speckle can vary between each fixture. These are considered natural characteristics and a hallmark of the handmade.

Due to the nature of clay, variations in size of up to 5% can occur and is a normal part of the manufacturing process. This is not considered a defect. When you place an order we will ensure that the ceramics are of the same size. If you have ordered ceramic products from us previously please get in touch and send us a photo so we can size-match as closely as possible.

Learn more about the process
Onyx Varieties
The fitting is available in two onyx stone varieties

Jade Onyx

White Onyx

Order samples
What to expect

Jade Onyx Stone from Turkey; the milky jade colour and its distinct rust coloured veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.

The White Onyx Stone from Turkey. The milky white stone and concentrated white marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Onyx Varieties
The fitting is available in two onyx stone varieties

Jade Onyx

White Onyx

Order samples
What to expect

Jade Onyx Stone from Turkey; the milky jade colour and its distinct rust coloured veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.

The White Onyx Stone from Turkey. The milky white stone and concentrated white marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Onyx Varieties
The fitting is available in two onyx stone varieties

Jade Onyx

White Onyx

Order samples
What to expect

Jade Onyx Stone from Turkey; the milky jade colour and its distinct rust coloured veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.

The White Onyx Stone from Turkey. The milky white stone and concentrated white marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Onyx Varieties
The fitting is available in two onyx stone varieties

Jade Onyx

White Onyx

Order samples
What to expect

Jade Onyx Stone from Turkey; the milky jade colour and its distinct rust coloured veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.

The White Onyx Stone from Turkey. The milky white stone and concentrated white marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
Onyx Varieties
The fitting is available in two onyx stone varieties

Jade Onyx

White Onyx

Order samples
What to expect

Jade Onyx Stone from Turkey; the milky jade colour and its distinct rust coloured veins are formed in the stone by different mineral deposits. As the veining and colours naturally occur, the marble can vary significantly from slab to slab, making each piece unique. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.

The White Onyx Stone from Turkey. The milky white stone and concentrated white marbled veins create a distinctive and classic aesthetic; however, variations in consistency in depth of colour and marbling veins do vary. Please note we will endeavour to match pieces within an order, however we are unable to accomodate colour preferences.
Metal finish
The fitting is available in three metal finishes

Brass

Brushed Black

White Satin

Order samples
What to expect

Brushed brass arrives with a bright brushed finish. It may show small signs of patination and fingerprints, but these should be slight. Then as time goes on, the brass will become dull and darken, and marks may start to show. Sometimes this can be accelerated in wet or damp environments. All our machined brass components use solid brass; we do not use plating. We apply a thin protective clear coat over the metal surface to slow the patination process down, but it will gradually patina over time.

Learn how to care for brass
ANYTHING ELSE WE SHOULD KNOW?

Care Instructions

Our products are designed to last however, proper care and maintenance will ensure their longevity.

Learn how best to care for your Marz Designs lighting products here.

Install Guides

Our lights must be installed by a qualified electrician. To make life easier for you and your electrician, we’ve created Installation Guides for each wall, ceiling and pendant light in our collection.

You can access Install Guides for Marz Designs lights here.

2D & 3D CAD library

Visualise all the Marz Designs product collections and curated furniture collections in situ with 2D or 3D CAD files, available in a number of different file formats.

You can access our 2D and 3D CAD files here.